Introducing the
ZIP Level Pro2000
The ZIPLEVEL ® PRO - 2000 DR is manufactured by Technidea Corporation, USA.
The New Zealand exclusive agency is held by Ultimate levels ltd in Christchurch.
Using a ZIPLEVEL ® is a true one-man operation and allows elevations to be taken literally 30 seconds after arriving at the site.
The ZIPLEVEL ® PRO - 2000 DR is lightweight, easily carried and consists of two main parts:
-
The Base Unit
-
The Measurement Module.
These two components are connected by a polymer cord 30 metres in length. The cord length does not limit the range. The range of the Zip Level is unlimited! These components are housed together when not in use.
The level operates by measuring the difference in elevation between the two units. Readings are relative to a 'zero' reference. You can set within 6.0 metres above or below the base unit.
There is no limit to the distance between elevations, nor is there a limit to the maximum or minimum elevation. The only restricting factor is your willingness to walk.
The Digital Display is precise within 2mm. In the dual range it is precise to 0.2mm.
The dual range (DR) is accessed by depressing 2 buttons on the Measurement Module unit.
Readings may be taken by using the hand unit directly onto the areas required, (e.g. boxing) or may be screwed to a unipod and read at about waist level at the points required.
The level has 16 different functions to assist users.
Readings may be taken in any scale - (feet, inches, cm, metres etc) and in 3 separate resolutions.
ZIP LEVEL Plus points
NO LINE-OF-SIGHT AND DISTANCE ERROR
PAPER THIN PRECISION OVER UNLIMITED RANGES
NEVER NEEDS FACTORY CALIBRATION
DISPLAYS DIGITS - NO CALCULATIONS REQUIRED
Corporate clients
